Hi
We've been in a new build for 2 Years 3 months, within warranty time we've had them out for mould and condensation issues in the main bedroom, and damp patches in the ensuite multiple times in same area (just kept painting over and stain blocking)
Wednesday we noticed a watermark on...
Customer has a gas boiler. Shower only gives out lukewarm water. All taps give out hot water. Have replaced the thermostatic mixer valve previously & the shower then worked perfectly. however over a period of weeks to months it gradually dropped in temperature back to where it is now with it...
hi all
new member in need of some advice.
we had out bathroom redone a few months back and to cut a long story, he didn't do a brill job. recently noticed water was seeping through around the shower tray so decided i would do the silicon.
after clearing the old silicon, i noticed under one...
Hi,
I’m having an issue in a new property where the shower must be all the way to the “hot” side to get hot water at all, and if you have it on full pressure the cold dilutes it.
Inside the shower ‘lever’ I’m seeing this. It is a 20 year old system. Is someone more knowledgeable than me...
Hello folks
Installed in my flat is a Triton Ivory 2 8.5 KW electric shower model number H12.
I am informed by my tenant that the shower occasionally will run hot, then cold, then hot.
I visited and ran the shower on my hand for 5-7 minutes. Adjusted the temperature up, then down, then back...
Hi,
I have a a Traymate shower tray installed in my bathroom which seems to have started leaking. It has been installed for just under 5 years now but I have noticed a brown line on the ceiling underneath in my garage which would appear to be directly under the horizontal shower tray drain exit...
Hello, everyone. The attached shows the shower/bath setting we inherited when we moved into our new home. The bath is a walk-in one, although I don't know whether that's relevant. As you'll see, there's a rain shower which is slightly coming loose from its fittings, and what I'd assumed was a...
Hi, I recently bought a Mira flight safe tray 1000x800 mm that needs to be raised. Are Mira riser kits sturdy or wooden frames are considered to be more solid?
Hi all! TL;DR - I used two washers, one on top of the other, to fix a leaking shower hose connection. Is this a good idea or not?
Longer version: I just replaced my old rusty shower hose. When I fitted the new hose using a single washer for the connection to the wall, water sprayed out of that...
Hi all,
Hoping you can help. I’ve been tiling my shower and was ready to grout before putting a massive scratch on one of the tiles. I went to remove the tile but it’s taken the tanking and some of the cement board with it. As it’s in a shower, I want to do what I can to make sure it’s not going...
Hi
I have a redring glow electric shower. It’s pretty much brand new all the hoses ect the actual unit itself is too. Was fitted about half a year ago. Has been working fine. Used it half an hour ago and now all of a sudden I’ve gone to turn it on again and there’s zero power.
Checked the fuse...
Hi
We moved in to a house with a decent Shower area. Only issue is that its a curved wall and im looking for some type of rubber/plastic sheet i could bond to the wall to stop the shower head wetting wall etc. The green area marked is where i would like to bond the sheet. Image attached best...
Hey all! I'm new to plastering. I'm renovating some large property by myself and learning a lot of plumbing, some minor electricity, woodworking, metalworking, glasswork ext. It's going great as I'm putting 24h a day researching how to and working :) I'm getting really better at plastering...
Hi all,
Our Mira Select shower (fitted in 2003) has decided to kick the bucket and the dial will no longer turn. After taking off the front cover is seems the plastic clip on the blue cold water side has snapped and we need a new cartridge.
I’m cautiously optimistic this is what we need...
Hey!
I am trying to finish off fitting this shower head but unfortunately seem to have run into issues accessing the thread. I’ve attached a couple photos of the issue. Would anyone know what would be required here? There’s tile then plasterboard, a cavity then where i have good access theres...
Hey!
Would anyone have any tips and guidance to fit this stop valve onto this pipe, please? It is a valve for a shower spray and i’m wanting it to go right in so the chrome plate covers the tile. I’m aware that something may need to go behind the tile so anything to make that simpler would be...
Attached is a ground floor picture of the soil pipe in our home. There was originally a toilet which has now been permanently capped off and you can also see a sink waste pipe attached.
My plan is to drill out one of the 50mm sockets directly opposite the current sink waste for a new 40mm...
I've have had my Aqualisa Quartz Digital shower for about 6 years and haven't had any issues up to now. I recently turned down the Combi Boiler so to heat to the Eco setting. This turned down the heat for the shower as expected, but not warm enough so then changed the boiler back to 75 degrees...
Hi. Hopefully a simple one but does anyone know how I'd go about removing one of these covers from a light in a shower please? And also where I could possibly get a replacement? The cosmetic damage to it just bothers me a bit and I'm guessing they're probably cheap to replace.
Cheers