texecom

Hi All, I have a Texecom Ricochet Premier Elite 64 system with a Odyssey-W sounder. The sounder batteries were low but by the time I got a ladder that was long enough to reach the batteries were completely flat and I was unable to arm the system at all. I was getting supervision faults and it...

How do you silence the alarm (main siren and internal) when you need to take the lid and internal cover off an Odyssey bell box. I would have thought that either a master code or engineer’s code would shut it up, but no, it doesn’t. I’ve recently installed my PE24 with Smartcom and it's all...

Texecom Proximity tag query. Hi just seeing if anyone knows if this is possible. I setup a few areas for my property. Full arm except Van - Area A outbuilding- Area B, garage- Area C Van- Area D Problem I have is my Mrs wants to be able to easily set the system without selecting the area...

Hi hope someone can help, I have configured a Part Set on my Texecom Veritas Alarm, Keypad option. 3 Zones configured, 2 Entry/Exit and 1 Guard, once set any of the zones when they are physically triggered will produce a muted beep at the panel but there will be around a 10sec delay before...

Hi, I have seen some good articles on here so hopefully you can help me. I have just wired a new PIR to my Texecom Premier Elite 24 panel. The PIR I am wiring is a 'Premier Elite MR'. I copied the same wiring as my existing three PIRs but I am getting a Tamper error. I have seen some...

Hi all, I have a Texecom Premier Elite 48 with a mix of LCDP and LCDLP keypads. Is it possible to configure the keypad to not beep when you're pressing the buttons? We have one keypad on the landing so we can part set the downstairs overnight, and the beeping when I disarm it in the morning...

Hi all, I know there are similar posts revolving supervision fault but I cannot find anything which relates to my issues.. Is there a way to make my system force omit my wireless PIR sensor? I have a Texecom wireless PIR in my van which connects to the system when on the drive but obviously...

Hi all, I am looking for support with a few things that happened with my alarm system. It's a Premier Elite 64, all wireless, left by the previous owners of the house. I had it serviced a two years ago and since I am learning bits on my own and with the help of this forum. A bit of background...

Hello all I have a Texecom Elite 64w version 5.01.03 and installed myself in 2019/2021. I needed to relearn a contact device for my backdoor but unfortunately I picked the wrong Zone when unlearning, therefore I believe I have unlearn my Odyssey X-W External Sounder. It no longer shows in the...

Hi I have two Optex BXS-AM which I want to wire to a Texecom Premier Elite 48. I’m struggling to understand the wiring diagram in the manual. The attached picture shows the wiring diagram from the manual. I would appreciate some advice on wiring it for left side detection (garden) and both side...

Hello, Looking for some help please! We have a Texecom Veritas R8 alarm system. We recently changed the battery in the main alarm box located in our loft, after suffering the annoying battery low intermittent beeping from the alarm control panel for months, which solved this issue. We've not...

Recently upgraded a Premier Elite 24 with a wired expander and SmartCom, last night it was on part set 1 (night set), bells fired at 03:05am, the log shows both a door vibration sensor and a D20 PIR both went to alarm state at the exact same time and restored at the exact same time, I find this...

Hi, I have had the Texecom Premier Elite 64 for a couple of years now but Im not really happy with it - lots of little things. I'm considering just removing the entire system. I'm a DIY newbie, and would appreciate some guidance on easiest way to do this? In terms of setup - I have the main...

Hi All I have the Texecom Premier Elite 24 with smartcom and Wintex. All has seemed fine for a long time, but I've just noticed that the red full arm button on our Apps, puts one of the part arms on instead of full arm! I haven't noticed anywhere to 'set' what action the red App button does -...

Hi All, Thank you for your time. We're moving into a new home in 2-3 months time and wondering the best way to secure it as we are strangers to the area. We had a burglary at our current house but at the time, we had no alarm system or insurance. Can I ask if it is possible to wire a texecom...

Hi all, would really appreciate if someone could help with some confusion I'm having with the wiring of a Texecom Premier Elite 64-W with dual Elite Odyssey 1 external sounders. Just to note, this is what I have: Texecom Ricochet Premier Elite 64-W Control Panel 2x Texecom Premier Elite...

So an after-school 'incident' occurred and the upshot is the panic button was hanging of the wall.. No issue I think as the wires still in place so its obvious the location of each. Anyway I've remounted the button and re-seated each wire in their original terminals. The issue now being that...

Hi sorry for a longer post, just trying to give as much detail as possible. I have recently moved into a house with a Texecom Elite 48 alarm ('menu - 4' shows sw v5.01.02.LS1) with a smartcom module installed. Over the past week or so I have been investigating the configuration of the alarm...

Hi, Texcom Version: Elite 24 V5.04.01 LS1 Smartcom: V03.03.00 Earlier this week, I migrated my Texecom Panel and Smartcom onto the Cloud so that we could move from v1 to v2 of the Texecom App. From the cloud account, I can see updates are available for both the Elite Panel and the Smartcom...

Dear All, I wonder if anyone can help. Have had premier elite 24 with a one entry exit contact sensor, around 6 Prestige TD WIRED PIRs and one keypad. It's been problem free for 6-7 years. Now initially, in the night, the downstairs hallway PIR would set off the alarm every 4-6 months and I...