tiles

Dear DIYNot forums members, The recent hurricane has blown some hanging tiles away from the side of my house and I would like to put them back in a way that will be more secure (the tiles have damaged cars parked on the drive). Would it be a good idea to secure the tiles with the No More...

Hi all We're planning on pulling up the living room carpet in our old house (late 1800s). I've pulled the corner up by the hearth to see what was beneath and there's some charming blue 50/60s vinyl tiles. They're pretty bashed about and I pulled the corner up from the other side of the room...

Hi all I hope you're all keeping well This is my first post and I'm hoping to get some advice on a case of extreme condensation in my loft. I've read the various threads I could find, but wanted to get your take on the solutions I've been offered by several roofers before taking the plunge. I...

Hello Basically I would like to use those ACME Sandstorm tiles that 1930's homes have, as it's in keeping with character, etc etc on a extension, but I would like to have a pitch between 15 to 20 degrees, not sure yet on exact angle. But I am unsure if planning will allow such a low pitch...

Evening, I am stripping and recreating my bathroom as my disabled daughter needs a walk-in-shower with supports, rather than just the over-the-bath shower we have at the moment. The bathroom is VERY small, so space is everything. I have stripped back all the tiles, plaster and render back to...

Can anyone confirm if this is good practice. Roofer has just replaced glass in roof with velux window but he has fitted it so ridge tiles are immediately above rather than a row of tiles then ridge tiles. We asked him to move it down but he has advised its ok? Should I insist before paying him?

One side is rough, the other is smooth, with the brand name, batch No. printed on. I've put up stud to enclose a new bath on 3 sides, time to put the Knauf boards on. The obvs is that the rough face will grip the cls better. So which face takes the tiles?

Dear DIYNot forum members, Hope that you are doing well in this difficult time! I was hoping to ask you for some advice before taking on the task of extending an existing bathroom tiles! Basically, I would like to add another column of tiles to the left of the existing ones. 1) Is it safe to...

Hi there. Can anyone give me any tips on installing Rounded Ridge tiles to my new build please? I've heard that its better to use sharp sand. Can anyone confirm the mortar mix ratio and any additives? How do you pack underneath the gaps/joins to ensure mortar doesn't drop endlessly onto the...

Hi, apologies if this is the wrong section. I'm in a bit of a pickle, our shower has started leaking, a lot, and it looks like there had been a small leak for a while that soaked through the grout (or round it) and destroyed the plasterboard behind it, this in turn allowed movement which made...

Do floor tiles go down before wall tiles go on? Are there skirting tiles? Is there any other type of skirting to tidy up the floor edges/btm of tiling, than standard wood/mdf?

Am putting a stud/Aquapanel bath alcove in (Aquapanels starting below bath rim, sat on bearers). How far above the bath rim should I set the btm edge of the tiles? Thank you Dain

We have an outdoor path leading to the front door that is laid with unglazed victorian quarry tiles (6x6 inch). Several of the tiles are cracked and need replacing and the grout between the tiles has all but disappeared. I was thinking of lifting and relaying the path, replacing broken tiles...

Hi, I am putting down new flooring on our top floor apartment (2007) that we just bought. One room has a balcony. It seems dampness is coming in from the balcony - particularly after rain [maybe that's obvious :o) ]. Is there any way to fix or mitigate this before putting down vinyl? Any...

Hi, Guys would like your advice and opinions please concerning my wetroom renovations. I have stripped the walls back to bare brick and removed the previous concrete screed. Sadly, the previous screen was done by someone who didn't slope it correctly allowing water to flow out of the wetroom...

2100 wall to take 1800 bath/shower. I'm putting studs using bathroom boards at each end to bring the 2100 down to 1800ish (just over), but the stud at the taps end will cover that whole wall to lose the pipework for new sink/toilet also. The face of the tiles infringing on the plan/footprint of...

hello folks, im trying to decide what the best way is to tile over hard wood floor, one option i have got is to lay a layer of bitumen over the hard wood as a water proofing membrane (to vaoid the tiles from cracking over time due to flexibility and humidity of the wood) and then adding adhesive...

Hey all, I'm in the middle of tiling my kitchen, simple splashback around the counters. I'm not overly happy with the colours now I see it up and I'm wondering if I should stop and paint the tiles with Ronseal before grouting? Do you think this would work well? I'm thinking it would look better...

I left HG Scale Away on ceramic tiles slightly too long - about 15 minutes. I was scrubbing away at hard to clean areas, that took ages to get off. It has left a white residue that doesn't come off if I scrub with water. I'm really hoping this is residue left on the tile (it looks this way) that...

Are ridge tiles supposed to be bedded on mortar along the sides or is just the vertical bit at the ends supposed to be grouted? I do have some on mortar along the long sides, at one end of the house but I suspect that was to bring them up level with the rest. Also, should so much mortar be used...