timber

Hey all - I recently had new decking fitted; overall, pleased with it but there's one panel that looks very notably different to the others. It is whiteish, and lacks the coppery green tint that the others have and which I believe comes from being tanalised. I realise that the panels will all...

I’m looking to paint our door canopy white. When we got the survey completed it was stated as PVC and timber. However I want to be sure to get the right paint and prepare the surface correctly. Can anyone provide some insight please?

Hi Thanks for your feedback in advance :) I want to build a climbing frame that is similar to this. Treated Fence posts are quite expensive and so was looking for a cheaper option. I don't want to buy an existing frame as the kids will eventually grow out of it and its expensive I was...

We are about to move into a house with original timber frames that are 27 years old. Many panes have blown, and all will likely follow in time. Our current thinking is to keep the timber frame and just replace the panes (and not replace everything with uPVC). But we are struggling to get a...

Large Timber Door Bowing - What's gone wrong? Could do with some expert advice please to see if this can be remedied on a replacement. The door is 1.1 meters wide approx, the construction is (I'm told) engineered hardwood solid core door (44mm) with 6mm tricoya face, the back is also faced with...

Hi all, We are going to replace our polycarbonate conservatory roof with a timber construction for all the typical reasons that people change them. What we understand from the various companies we have spoken to along with the research that we’ve done independently is that once the...

I've drawn up plans for a 700mm wide decking path using timber joists, decking blocks etc etc, but I feel like I'm massively over complicating it. I also want it to be flush with the grass level, so I'll need to excavate a whole lot of soil. In these photos, I can see the guy has used some kind...

Hi there, I'm planning on building a timber extention on the side of my house, it will be 2.4 highest down to 2.3m away from the house. The area will be 6m parallel to the house x 2.4m out to the boundary leaving a 170mm gap to the fence, will be insulated and it doesn't exceed more then half...

Can anyone tell me if i can use Zinnser Gardz as a primer on cheap bare timber doors in prep for waterbased gloss?

Hi All I am planning ahead in regards to my flat roof for the garage. It is completely isolated in the garden and there are no walls on either side to use the bolted wall plate. The builder is in process of laying the block work sometimes this week. I have watched EPDM videos on youtube and it...

I know it may have been the worst job a carpenter has made to my house. Got old stair post clad with 10mm timber and gaps was filled with filler. This keep cracking when season change and temperature in the house rise. Would be good to open the gap between the 2 timber and fill it with...

So I want to add insulation and then board over it - the joists are already 170mm deep so I only need another 100mm insulation. There’s not much headspace and loft legs are too long. I was thinking of running some timber around 125mm x 45mm across the existing joists which are 170mm x 45mm, so...

Due of timber cost going mad day by day I was thinking to use c16 4x2 timber to make a garden summer house/ workshop in conjunction with 18mm plywood. Would you use c16 as main structure for the walls and what is the real cons against the c24? Thanks

Hello any advise on how to repair those pillar's and prevent future damage ? they are solid oak but are rotting from the bottom up. I was thinking of putting some acrow's then cutting the pillars where the rot is and dig up a hole and fill with concrete and use something like this ? there's...

Hello everyone, I am looking at building a timber lean to veranda / patio cover down the side of my house and was hoping that I could get a bit of advice on how to do it. The span is going to be roughly 2.7m wide by 6m long with a roof at 15 degrees. The whole thing will be painted with...

I'm about to fit a couple of bespoke aluminium fascias to my extension, replacing the rotten plywood and timber mess left by the builder. My question is: what should I do to the new plywood I'll be installing, which will then be clad in the aluminium? Can it just be primed or sealed, or does it...

Hi all, From the pictures you may be able to see that I had heavily damaged plaster and a damp patch on the right hand side of my wall. After investigation, it was realised that poor guttering had led to water contact with the brick and it had eroded the external brickwork. This was then...

I've got a workshop on the go and unfortunately didnt check the timber that arrived at the time as I should have done! It's for my workshop and so not overly worried about the shakes and imperfections as they dont go all the way through. I just wanted other chippies opinions, is this typical of...

Hi All, I bought a timber cladding house which built in 1920. My neighbors and the previous owner also claim that they never need to replace any timbers, just paint over it. But then I look at tje current stage of the wall, I am not quite sure does it needs replacement to all or just a few...

I know this is bad. Really bad. I'm a grade-A idiot. Hopefully the worst DIY mistake I ever make. I just got done laying 6m x 4.8m of decking onto joists without leaving gaps between. I put three nails in each board - one either side and one in the middle. The nails are ring shank, I think. I...