timber

Hello In the attached photo is a roof truss I think I need on my garage, that I wish to build. It's of a slight unconventional design it seems. I was just wondering if something like that will be passed by building control? I was also thinking that, would they a support to be added that is...

Hi Guys, I will be attempting to frame my own 100sqm flat roof my self! Will be using 9x3 timber all round.... what type of nails and sizes do you suggest fo this size timber? I will also be creating a trimmer for part of the roof...what is the best way to bond the 2 timbers....nails or bolts...

Hi Guys, Looking at the attached plan... with the joists running left to right.... which joist size would be suitable: 1) 8x2 2) 8x3 3) 9x3 The internal walls are solid block and load bearing

I have a hardwood timber door sill that has rotted away. Not sure how it's rotted so bad. How do I fit a new door sill? If I slide it in beneath the door jams, how do I secure it in place? The old one appears to have been nailed to the door jambs - the rusty nails can still be seen protruding...

I have to build a 1m height false wall to hide the toilet cistern. I only got 200mm. How would you place your 4x2?

Hi, All my floor joist bounce but after recently rearranging my bedroom the joist next the wall is now getting walked on more and is bouncing. I have tried glueing and screwing plywood to it but no joy. There is a 60mm gap between the joist and the wall, the joist is over a patio door. See...

I understand materials during lockdown has been in shortage but what I got delivered is awful. Trying to make a very small wall but when doing nothing the stud does not align and this is causing me a lot of headaches. I have attached photos. What do you do in this case. Do I made some...

Hi all. Im planning on building a summer house at the bottom of the garden but it’s going to be quite large approx 7m wide x 5m deep. An the wife has now decided that she wants a apex tiled roof on top. I was just wondering would this be possible on a timber frame an if so what timber would be...

Hi, is it possible/safe to screw 4 tall planters to decking and concrete in posts for a pergola? Said pergola will be approx 2.5x4 & 2.5 tall.

I have got planning permission to divide one larger room into two with a timber partition wall ending in the external large existing sliding doors opening (with concrete lintel above). I am struggling to find any construction details for an external timber pier for this dividing wall between...

I have used lengths of untreated softwood timber (9" x 2") to make a small decked area and a step up to said area. All timber is sat on concrete blocks (not soil or grass) and is raised around 10" off the ground. Given that it rains a lot in this country, I have concerns over the wood rotting...

After slabbing an area at the bottom of my garden, this area has been vastly improved. The recent week of non-stop rain would have flooded the area in the past, but with the new patio and drainage with soakaway there isn't so much as a puddle. Unfortunately there's an area of about 14 ft by...

Hi all, I am looking to board up the loft to a good standard ("proper" and all). Everyone recommends - in order to hold the insulation to raise the floor before boarding. And the best way is to do this is to screw cross-battens into the ceiling joists - (2" by 4" timber battens have been...

Hi I'm looking at replacing current single pane wooden sash windows with new, double glazed units and want to be sure I'm making the right choice as it will obviously not be cheap and I want hear to last a long time! The choices I have are from Company 1: European Redwood or Meranti hardwood...

Hi, I am constructing a 3m high stud wall where space is tight. Would it be better to use 45mmx45mm studding or to use CLS 38mm x 63mm studding turned "sideways"? (I am assuming that the CLS will be straighter/truer etc) If CLS "sideways" is an option, does that mean the sole/head plate will...

I'll be putting up a summer house with small balcony next year. I've contacted the local authority with my plans and there are no restrictions. Both neighbours have no problem with the plans either. My query though is about the stilts I intend the fix the summer house and decking onto, rather...

We're just completing a new build extension and planning to build a deck out from it, ie 2.5m out by 5.0m across approx. Deck boards 5.0m to run perpendicular to building so joists 2.5m going out from building. There is a patio doors pvc sill below which there is a gap then the concrete sill -...

So I have an existing stand alone garage of cavity brick construction that needs a new roof and roof joists, currently the brickwork is about 1900mm high and as I'm putting a new roof on, i'd like to raise the overall height to 2500mm (it's on a boundary). My plan is to build a stud wall about...

Which would be the better and long lasting application, zinnser allcoat or sikkens filter plus on exterior timber windows/doors to protect wood from rain and rot and repeat maintenance?

Hi, I have some timber window frames on my house. To the front of the property the windows look like they are hardwood and currently have a Ronseal exterior woodstain on them. To the rear of the property the frames appear to have a painted gloss finish (not sure if the frames are hardwood or...