window

Hello, I am wondering if my window gaskets are replaceable? As they are mostly broken it seems to be impossible to get them out or they are not suppose to come out. Any advise would be appreciated Thanks IMG_2945 by Greg_0ry1 posted 5 Dec 2019 at 5:14 PM IMG_2946 by Greg_0ry1 posted 5 Dec...

Hi All, Hoping for a bit of advice. Recently bought a new house and noticed a number of the windows don't lock. On further investigation I noticed the handles have a spade rather than spindle. I managed to source a replacement handle, they're known as cadenza handles, but it seems the lock...

I have some cottage timber windows (Jedd Wenn or Magnet) where rather than having the handle clip into the window frame itself, there are plastic keeps (similar to the keep of a yale lock) that are screwed to the face of the frame that I need replacing - anyone know where I can get these or even...

Hey all! I've lately been noticing some draught coming from the left side of the left panel of two of my windows. I understand that you can adjust the tightness of the window against the frame by turning the lock head with an Allen key. Unfortunately, only the right panel of my window has a...

Hi should you caulk around the inside of a wooden frame? I have fitted a new glass unit with security tape but should I also seal it inside? I was looking for rubber sealing same as you see on PVC. Thanks

I had this door put in but it was all a bit ad hoc so the door reveal was too wide and some add-on pieces were put on (I don't know what the correct term for them is). The interior emulsion is starting to spot with mold along the inside of the frame so obviously it isn't sealed. I think the...

Hi, Two of our upstairs windows have packed up (just before winter!). The bottom shoot bolts on the windows are not retracting up into the windows. I have looked at the gear box and it looks like the name on it is ‘Saracen’. It’s not like a new locking system in that when I open the window I...

Looking at replacing our kitchen window with a fully glazed (picture) window. It's about 1750mm x 1250mm, and so all options at that size are fixed (non-opening). Is this allowed, or must the window be fully opening to allow for forced ventilation? I don't want the gas-safe installer to refuse...

Where the board is overlength but just along the front/room edge, so that this edge of the board extends at each end beyond the width of the window, to continue a few inches along the rendered and skimmed inner face of the wall. Is there a term for this detail? Thank you, Dain

Hi, Sixties property, recently installed new window. Window fitters removed the blind and put it back but screw were loose and roller blind about to fall off. I drilled a new hole to fit raw plugs but made a mess. I realised the wall above the window got a big void (not an expert). How to fix...

Hi, I moved into a new flat that I'm renting recently and there is a window lock/latch on one of the sliding windows. I just wanted to know if anyone knew what it's called because I want one for the other sliding window as it'll help me lock them while I have the outer window open. I've...

Hello, Social housing tenant here who had new windows installed over a year ago. Been getting dead bugs on the window sill and noticed there is no insect guards fitted in the trickle vents. Reply from housing is vents conform to building regs, so nothing they are prepared to do, but i can...

hi i am fitting window board for my conservatory but the frame is metal instead of bricks. so what should i do to put board on metal base? should i screw it just use glue? which kind of glue is best for puvc and metal?? thanks

hi i am fitting window board for my conservatory but the frame is metal instead of bricks. so what should i do to put board on metal base? should i screw it just use glue? which kind of glue is best for puvc and metal?? thanks

Hi, I am getting my bathroom redone, and in the process have decided to replace the timber sash window with an aluminium one. I've received a quote from a company that deals with Origin windows, but rather late in the process they backed out and said they will do supply only. The price they...

Fitting a window in an hole that is 40mm out of true top to bottom & has an arch at the top. So, have frame extenders for sides and top- question, should I mitre them where they meet or just butt join? Q2- what's the best blade for cutting pvc in my mitre saw? TIA

Had these windows installed last year and I've always thought the fit looks wrong. I can't help but look at it everyday. The base of the window is thicker then I have ever seen in anyone's house and I always wondered if it was measured short. The previous windows were much less intrusive only...

Hi All, We are having some windows fitted, but the opening is being reduced. The window company assure me it is ok to brick up the space then fit the new window on the same day. I have not seen this done before. Do you think this is ok? Thanks!

Hi, We have just purchased a house and the front lounge window is completely made of glass as pictured below. We want to replace this with a bay window and have been told buy the people we got a quote from that "No need for planning permission as we are not widening the window only changing...

Hello, 1 of our windows won't lock anymore,the key turns halfway but you can still press the button in to open the window. Is this fixable or is it a case of buying a new handle & lock?