Cable size outdoor LED flood

Murdochcat · 23 Nov 2023

This is what I see

EFLImpudence · 23 Nov 2023

Use a PC - or hold your phone in landscape.

Murdochcat · 23 Nov 2023

EFLImpudence said:
Use a PC - or hold your phone in landscape.

My PC is about 4000 miles away

But yes landscape looks better but my phone is always locked in portrait.

Every day is a learning day

JohnD · 23 Nov 2023

Abyone said:
There are a lot spots in the house alright, mostly now with LED bulbs but house was built 20years ago.
There is already a standard light switch installed inside for the lights, I was just planning to connect the lights.

A standard light switch does not fully isolate the lamps.

Abyone · 23 Nov 2023

JohnD said:
A standard light switch does not fully isolate the lamps.

Thanks. Are you saying I need the fused connection because of the cable size on a 10A circuit?
If I go for a 1.00mm or larger cable would that be better ?

JohnD · 23 Nov 2023

I'm saying you need a DP switch

And if you're fitting one, you may as well use a SFCU. The incremental value of the fuse it small, but the cost is smaller.

One with a "neon" can remind you when it's on.

Abyone · 23 Nov 2023

If it's a good idea to add a DP switch then I'm happy to go along with it.

Just want to confirm, is there is any issue with the 0.75mm flex in my circuit.

JohnD · 23 Nov 2023

0.75mm is only rated to 6A, so it would be preferable to fuse it down. A 3A fuse will be plenty for your outdoor LED lighting and is widely available.