Pyronix enforcer alarm output when armed

Thanks @sparkymarka
please could you advise any further on the wiring? I’ve attached my garage door manual. I assumed it would be figure 11, terminal 21 signal Chanel 1 impulse to Enforce PG1?
 

Attachments

  • IMG_6542.png
    IMG_6542.png
    579.7 KB · Views: 55
Output wired to relay which in turn shorts the two wires in FIG 14
Will have to check what programming options need to be set when I get home ( away at moment )
 
No to relay …will try a small Paxton relay on the enforcer if I get chance this weekend as most of the ones I’ve fitted with a garage door function have been the euro 46 which has a relay onboard allready …
Yes to push button
 
Thanks! I’ve had a look at programming and doesn’t look too difficult.
I just need to get the correct relay.
Worth asking pyronix?
Maybe a 1 Channel relay like the one below? With the garage motor connected to COM and NO?
IMG_6546.png
 
Yes maybe, can’t seem to find any recommendations in their install manuals.
Do you think that Amazon one’s worth a go or would you suggest the plaxton?
 
Ok tried it with a relay connected to PGM and 12+
Change outputs / end station outputs / PGM Output needs to be 170 user defined
Program user output as timed ….set it to 2secs and then name it garage door ….
Go to engineer tests / test outputs , test 170 ,
 

Attachments

  • IMG_2617.jpeg
    IMG_2617.jpeg
    120.3 KB · Views: 71
  • IMG_2627.jpeg
    IMG_2627.jpeg
    166.3 KB · Views: 63
  • IMG_2630.jpeg
    IMG_2630.jpeg
    196.2 KB · Views: 65
  • IMG_2626.jpeg
    IMG_2626.jpeg
    151.5 KB · Views: 72
  • IMG_2625.jpeg
    IMG_2625.jpeg
    204.6 KB · Views: 70
  • IMG_2631.jpeg
    IMG_2631.jpeg
    255.1 KB · Views: 66
One last question - where’s the best place to buy the IS M12? There’s a CEF (listed on IS website as a distributor) local to me but they don’t have this item listed.
 
Hi everyone, just to share an update. All wired in as to @sparkymarka photos and programmed and it works perfectly.
I can now control the garage door with the “ii” button on my pyronix keyfob, on the home control app and with a doorbell on the inside of the garage.
Many thanks @sparkymarka , much appreciated!
 
You must log in or register to reply here.
Back
Top