Recommend a vacuum cleaner for garage

lostinthelight said:
I've had a Pnts1500 wet and dry vac with power socket from Lidl for the last 3 years which has exceeded my expectations.
For really mucky or bulky stuff which would fill or block the bag quickly I use an ash can attachment, the latter I use on the house vac as well and it's superb.
View attachment 261378
Click to expand...
I've noticed aldi have thus available from Sunday
Screenshot_20220218_144221_com.android.chrome.jpg
 
I haven't been able to get on Aldi site to check but It would be a deal breaker for me if it doesn't have a power socket on it to switch sanders etc on and off
 
Yeah, that is like mine.
Bloody brilliant.

look at Screwfix or toolstation. They often have similar
 
JobAndKnock said:
Couldn't find your Stanley lead, but I found a vacuum switch box on Amazon, at £78? Toolovation do it cheaper at £70, but still you could build always your own
Click to expand...
Ouch.

Every so often lidl do a 5 socket extension with master and slave function. Intended for home electronics such as TV and wifi or computer stuff, but may be OK for tools.
 
Why buy a vacuum switch when they come built into sub £100 vacs. I plug a multi plug extension lead into my vac and then all tools plug into this. As soon as I operate a tool the vac comes on. Can then just swap the vac hoses over as and when for each tool or build a full system with all hoses linking to the vac. Vac stays in the corner and then emptied as required. If doing lots of woodwork would recommend a cyclone bucket to colelct the dust easier and not clog up the filter of the vac.
 
Agreed. It got mentioned, so I went and had a dig around as the discussion wqs about lower cost vacs. My work vacs are power take-off models, but the switches won't work reliably (or for a long period) with 2000 watt routers or 1800 watt chop saws, which is typical. Seriously considering building a PLC controlled slave switch (partly because I have a couple of PLC switches kicking about and some 30A relays).I'm with you on the pre-filter cyclone - I have built one for a work vac which works well and keeps the main filters and filter back very clean, although it looks a bit Heath-Robinson, so maybe a mk.2 super-slick version is called for
 
For £20 you can purchase a remote control pass through plug. You could run an extension lead from it and plug the sander/tool in to it along with the vacuum. Keep the remote in your pocket and press the button as required.

I have a HVLP turbine for spraying which I try to keep as far away as possible when spraying, approx. 7m away. The remote control saves me having to walk back and forth.
 
You must log in or register to reply here.
Back
Top