Two Sockets stopped working

So most of us might not have a 32A radial circuit for sockets but quite a few might actually have - no problem, it is listed as a standard circuit.
I am more interested in the breaker in the off position - could that be the circuit in question?
Example - could it be a repurposed old shower etc circuit that is now a dedicated small ring/radial or even a lollipop (a.k. A lasso) circuit?
 
CBW said:
JohnW1?:ROFLMAO::ROFLMAO::ROFLMAO:
Click to expand...
When I joined this forum, there must have been both a JohnW (my usual first choice) and JohnW1 (my usual second choice) already here, so I ended up as JohnW2 !!

Those other two must have subsequently 'gone', since the only JohnW.... here now seems to be Johnw100 - who, although he's been a member for over 10 years, has only ever posted 19 messages (none in the Electrics forum) ;)

Kind Regards, John
 
ebee said:
So most of us might not have a 32A radial circuit for sockets but quite a few might actually have - no problem, it is listed as a standard circuit.
Click to expand...
As I hope you understood, I was trying to make an 'educational' point for anyone who read this thread.

Just as one often sees the (very incorrect) suggestion that two cables connected to most sockets on a circuit indicate that the circuit is a ring final, I was trying to make sure that people reading the statement I was commenting on were not thereby led to believe that a 32A MCB also indicates that the circuit is a ring final.

So, for anyone who doesn't know .... a circuit in which there are two cables connected to most sockets OR a sockets circuit protected by a 32A MCB (or 30A fuse) may be either a ring final or radial final circuit.

Kind Regards, John
 
JohnW2 said:
I feel sure that I am not the only person who has 32A radial sockets circuits in their house :)

Kind Regards, John
Click to expand...
Indeed not, Early last year during a CU change I altered a 16A radial to a 32A radial to take advantage of the 'standard' set of MCBs that came with it. Dead easy as it is just a DSSO on the side of the cupboard the CU is in, total length of cable ~600mm
 
JohnW2 said:
When I joined this forum, there must have been both a JohnW (my usual first choice) and JohnW1 (my usual second choice) already here, so I ended up as JohnW2 !!

...

Kind Regards, John
Click to expand...
Indeed I clearly remember the confusion I had with the names
 
SUNRAY said:
Indeed not, Early last year during a CU change I altered a 16A radial to a 32A radial to take advantage of the 'standard' set of MCBs that came with it. Dead easy as it is just a DSSO on the side of the cupboard the CU is in, total length of cable ~600mm
Click to expand...
Well, that wasn'tr much of a 'radial circuit' :-) ... did you use 2.5mm² cable, I wonder?

As I'm sure you understood, I was actually talking about 4mm² multi-socket 32A radials!

Kind Regards, John
 
JohnW2 said:
As I hope you understood, I was trying to make an 'educational' point for anyone who read this thread.

Just as one often sees the (very incorrect) suggestion that two cables connected to most sockets on a circuit indicate that the circuit is a ring final, I was trying to make sure that people reading the statement I was commenting on were not thereby led to believe that a 32A MCB also indicates that the circuit is a ring final.

So, for anyone who doesn't know .... a circuit in which there are two cables connected to most sockets OR a sockets circuit protected by a 32A MCB (or 30A fuse) may be either a ring final or radial final circuit.

Kind Regards, John
Click to expand...
Yes totallyJohn. I was just trying to reenforce your words against what some had said
 
JohnW2 said:
Well, that wasn'tr much of a 'radial circuit' :) ... did you use 2.5mm² cable, I wonder?

As I'm sure you understood, I was actually talking about 4mm² multi-socket 32A radials!

Kind Regards, John
Click to expand...
No not much of a radial at all but it had been on it's own 15A fuse since forever and the tenant was in the habit of pulling fuses when he went on his regular 'long weekends away' and only left that socket powered for his modem/ring doorbell.
It was 2.5mm² but that would not comply, despite it being acceptable when added to a ring final, so changed it to 6mm² (what I had with me).
 
Last edited:
Yep 4.0 would likely suit a 32A radial but a 6.0 t & e would too providing it fits okay in the particular sockets used. Indeed you could single spur from each with 2.5 t & e just like on a ring final too
 
SUNRAY said:
No not much of a radial at all but it had been on it's own 15A fuse since forever and the tenant was in the habit of pulling fuses when he went on his regular 'long weekends away' and only left that socket powered for his modem/ring doorbell. .... It was 2.5mm² but that would not comply, despite it being acceptable when added to a ring final, so changed it to 6mm² (what I had with me).
Click to expand...
Why do you think 2.5mm² cable protected by a 15A fuse would "not comply"?

Kind Regards, John
 
Update: the sparky never turned up, but miraculously the sockets are working again, never touched anything! I don’t know wether to be happy or concerned
 
You must log in or register to reply here.
Back
Top