Use a 3 way WiFi switch for a single light?

EFLImpudence said:
ericmark said:
Seems to show two electronic switches, which seems pointless, as why would you want two switches for the same light controlled by an app?
Click to expand...
So they can be used manually as two ordinary two-way switches ?
Click to expand...
That would surely be equally true if only one of the two switches were 'electronic'?

I think I have to agree with eric here. Unless there was an issue of aesthetics (wanting both switches to look the same), if one has "two-way switching", I see no reason why both switches would need to be 'electronic' (operable by an 'app'). With one of those plus a conventional switch, either could be operated manually and the switching could also be accomplished 'by app' (which would do the same as manually operating vthe electronic switch.

Kind Regards, John
 
Thank you @JohnW2 yes as said can't see why two electronic switches other than looking the same.

I would love to hear how this switch works, unfortunately I have no neutrals at my switches, so no good for me, and I have slowly moved to smart bulbs, which seem to work better than smart switches, I was singing the praises of the Energenie Smart light switches, until out of 5, I only have 2 still in service. Also one socket failed, turned into a flasher unit.

The problem I have is the CU is not in the main house, I need to go outside, down a set of steps, and into the flat (was a garage) under main house to turn the RCBO's off, so swapping a light switch involves a lot of up and down, far easier to change a bulb.
 
JohnW2 said:
That would surely be equally true if only one of the two switches were 'electronic'?
Click to expand...
Possibly - but not if they communicate (or work) by electronics.

If not, then aesthetics it is: if they don't make a dumb one that looks and works the same.
 
EFLImpudence said:
Possibly - but not if they communicate (or work) by electronics.

If not, then aesthetics it is: if they don't make a dumb one that looks and works the same.
Click to expand...
They are touch switches, so work by electronics and are probably bought for the aesthetics!

Screenshot_20230316-152803_Chrome.jpg
 
EFLImpudence said:
Possibly - but not if they communicate (or work) by electronics.
Click to expand...
That would be true if they were essentially 'local' electronically-activated switches which communicated via some 'signal wire' (rather than by using conventional 'two-way' wiring). However, I am 'assuming' (I think not unreasonably in this case) that the diagram we have been looking at is correct, which shows two "SPDT" switches connected conventionally by 'strappers'. If that's the case, then it would presumably work just as well if one of the switches was conventional (mechanical).
EFLImpudence said:
If not, then aesthetics it is: if they don't make a dumb one that looks and works the same.
Click to expand...
Yes, that was my suggestion.

Kind Regards, John
 
JohnW2 said:
That would be true if they were essentially 'local' electronically-activated switches which communicated via some 'signal wire' (rather than by using conventional 'two-way' wiring). However, I am 'assuming' (I think not unreasonably in this case) that the diagram we have been looking at is correct, which shows two "SPDT" switches connected conventionally by 'strappers'. If that's the case, then it would presumably work just as well if one of the switches was conventional (mechanical).
Click to expand...
Yes, I agree.

This would seem to prove you right.

1678981948931.png


1678982062655.png
 
You must log in or register to reply here.
Back
Top