alarm

I have recently had a Pyronix Enforcer alarm installed and have 2 remote keypads, one wired and one wireless. I can change the volume of the wired keypad easily enough by going into the keypad menu, but the wireless keypad has no LCD display, so presumably does not have the same settings...

Hi, I have just moved into a new property that has a Texecom Premier 24 system throughout. When I was scanning through the control panel and seeing the status of each zone, it tells me that the front door DC is "active". The front door is locked. So I decided to have a look at the door and...

I have inherited a Wien Solid State Digital alarm clock; the digital type with flip numbers. I haven't dated it yet but I'm guessing it's from the era between the late 1960s and early 1970s. The unit works fine and is a pleasure to have. It also has a very loud alarm sound which is perfect for...

I have a texecom premier 48 (older panel) I installed a while back but cannot get it to finish arming and never have managed it... It just keeps buzzing and claiming it will arm but never does, until cancelled with the user password. I can't see anything obvious in my settings that would cause...

Hi all I recently installed a texecom alarm system to my property with a smartcom box all seems to be working correctly apart from a constant green flashing light on main panel, I did reset the panel from box but everything works as it should,any ideas to why this green light is flashing would...

Hi all please help I have a texecom 24 fitted with 2400 as per manual it's connected to the same phone line as the card reader in a shop however when I connect it up it hijacks the line constantly so the card reader can't dial out to make connection please help as I'm struggling

Hello To all, Recently I bought a house . The alarm type is Eurosec ( I believe it is CP8L) The previous owner mentioned that they never used this alarm and they forgot the code. The display shows "Mains Flt" I don't know what this means, Is there anyway to make this alarm working. Please help me.

hi Had this alarm fitted and have an iOS app called ControlPlus which works with the system inside the house. The alarm has a Wi-fi connection to my router. Outside the house, the app doesn’t function. It can’t connect. Does anyone know how to configure the control unit or the app to work...

hi guys Working on a microtech 18 today replacing the webway, replaced the old webway with a new one as was faulty but I’ve ran into an issue, when exiting engineer mode it came up with module missing, I pressed the * key to remove it but now cannot for the life of me get the module back. What...

Hi, I have been installing alarms for about 8 years and very rarely I have any problems with false alarms. and when I did i was able to solve it. Recently I have installed wired Pyronix Euro46 App alarm but once a while gets false alarms on diffrent sensors. So I did decreased sesitivity...

Hi The transformer in my alarm died with a load bang yesterday and tripped the circuit breaker. I want to replace it since the alarm still functions with just the battery but I cannot find a new part specifically for it anywhere online. Can anyone recommend a suitable alternative? Thanks Dave

Hi everyone Can someone help work out what's this box! It keeps beeping all the time, it's located above front door to my apartment 35888213_1755393327872986_6679753749734359040_n by p1otrek posted 3 Jul 2018 at 1:26 PM I got Scantronic 9930 alarm fitted, is this part of the alarm? Can I open...

Hope someone can help me, I have a Veritas Excel R8Plus alarm in the house (it was installed when the house was built about 10 years ago). I don't really use it, as there's always someone in the house. The electricity board cut the power for about 4 hours yesterday as they were doing some work...

Hi folks, I've currently got an Accenta 8 G3 with 1 remote LED keypad & are upgrading it to a G4 with 3 remote LCD/LED keypads. I managed to get a couple S/H online but one of them seems to be programmable on its own, it had some text already & I've managed to clear that but instructions for...

Hi, With a bit of help from the forum, I have my Elite 24 up and running :-). My job for today was to add the Smartcomm module and 32XP-W. The former has gone ok, but I'm stuck at the latter. The panel recognises the expansion module, however, when it searches for the wireless PIR (sitting...

Hi, With a little help. I've almost completed my DIY swap over of a gardtec to a premier elite 24. I have two head scratchers left. Here is the first one... All of the devices are finally shown as secure :-). With the exception of the door contacts, which are "entry/exit", all are set to...

Hi all, 15 year old Premia 9 alarm. I want to get a full intensive service done to it - and any fixes / improvements done. I obtained a copy of the original service manual - which is blank. What is the right language to be using when putting together an advert for this job. Am I asking for...

Hi, a friend if mine has bought a house, which has 8 core alarm cable run from (1) front of the house, (2) back of the house and (3) garden shed to the electrical cupboard underneath the stairs. The cables are just rolled up without any connectors/connections and it seems like it has never been...

Hi. I'm decorating at the moment so need to open the pir's and unscrew from the wall.....to get at the old wallpaper behind it and put up the new. I'm scared to undo the pir in case my alarm goes off and I cannot stop it. Is it safe to unscrew it? Even if I can just disable it so it doesn't...

Hi All, I'm having a bit of difficulty trying to work out what electrical work I am permitted to do myself in my Scottish flat as most information I can find online relates to England or regular houses. I keep coming across this PDF online which seems to state that I can do very little outside...