alarm

Hi, I have a Sterling alarm system which was installed approx 10 years ago. I would like to change the Master User code and the User codes however, having downloaded a user guide I do not have the 'change code' option available when pressing the FUNC button. The only options which appear are...

Hello I bought one of the standard Yale EF Alarm Kits (with a remote button keypad, not a digital one) and two key fobs. The alarm kit is this type - https://www.yale.co.uk/en/yale/couk/products/smart-living/ef-series-alarms-range/ef-series-standard-alarm-kit/ Is it the case that if I arm the...

Hi All, I am considering updating my old Alarm system and had a few questions I was hoping some of you guys might be able to help with. My current alarm system is a wired system with PIRs, bell and front door contact. It has a main panel and a wired keypad. 1) In upgrading it, I was hoping I...

So I am at my grandparents in Maidstone installing a Wireless Pyronix alarm in their bungalow. To run power to the panel, I take a 1mm² T&E from a junction box in the loft (what is on one of the lighting circuits) to the FCU and then to the Pyronix panel. First check for power at the panel and...

Just a few questions about the Pyronix Wireless Enforcer system, as I am installing one tomorrow at my grandparents. 1) What is it about a 4 digit code not being compliant with BS8243 for unsetting the system as stated on the panels flip down guide? I take it it has nothing to do with the...

My house has a Gardtec alarm system - installed about 10 years ago now. Over Christmas (I was away), neighbours told me that the external sounder went off on two occasions. On returning, the LCD on the keypad appeared to be completely dead. I assumed some sort of power failure at this stage...

Can anyone supply me with instructions on how to lower the entry/exit volume that comes out of the main panel when entering/exiting? It's currently deafening levels, and there's no way you could come back late at night without waking up the already sleeping household. I've got the engineers...

Hi, Over the weekend we noticed the alarm didn't seem to be working. Turned out its working fine, but the internal sounder, (a Elmdene INT500) is not working.. If we arm the system it used to emit a squark, same on disarming.. Not it just emits a very small clicking noise.. I removed the...

Hi there. I rent a property and it has a C&K 700l fitted and the keypad panel has died. Can anyone tell me if it is possible to just straight swap for another identical panel. I have sourced one I just want to know if I'm wasting my time. Thanks in advance.

Hi there. I rent a property and it has a C&K 700l fitted and the keypad panel has died. Can anyone tell me if it is possible to just straight swap for another identical panel. I have sourced one I just want to know if I'm wasting my time and money. Thanks in advance.

My power went off and we had electricians, britishgas and western power to try and fix the issue. It took 6 hours. As soon as the power came back on the alarm started to go off but the screen for the keypad wasn’t on so we can’t shut off thhe alarm. How do we go about turning off the alarm...

Hi all, just wondered if anyone had come across this. We have inherited an alarm system in our new house and are pretty close to having it programmed the way we want it. The alarm is an Accord XPC for which I have the manual. What I can’t find info on is the attached prox reader (used with key...

Please please please for the love of god can someone tell me how to disable the insanely annoying beeping I'm getting every 10 mins so that I can get a decent nights sleep. We inherited this alarm system with the house and its seemed to work ok until now. I don't care about replacing the...

hi everyone i've got a problem with my alarm which i've put up with for the past few years, but now it's really starting to annoy me! it's a scantronic i-on 40. i've got 2 door contacts and 3 x PIRs. the keypad is in a cupboard in the hall, which is protected by one of the PIRs. it's...

1504031510001108775198 by Fixxxer posted 29 Aug 2017 at 7:32 PM I've just bought a house with this alarm. I know the code, but no idea how to turn it on, and the previous owner is not contactable. Any idea how I turn it on going to bed at night? Thanks in advance!

Hi, I am installing a DSC PowerSeries PC1832 panel and having trouble disarming. With the alarm set, when I enter via a delay zone I am unable to disarm the system with the user code. After the delay the alarm enters the alarm state, at which point I am able to stop the alarm with the user...

Ive had an Yale ENA "Smarthome" alarm for a while, but today i made the dreaded mistake of entering an incorrect code 5 times to access it. Now the system just beeps at me furiously no matter what key i press and nothing else works. I cant login. Tapping the Engineer button to try and log in as...

ive recently changed router and it has a different ip range to the previous one. My texecom premier was setup as a static ip. I need to change it to dhcp so I can see it on the network and thn be able to integrate it to my home automation. Do I need to crash the alarm and thn reprogram it from...

Hi, I've just upgraded my G2 C-012 alarm with the ethernet module. I've connected the wires and powered up with no fault code. However, i'm not sure what information i should be inputting into the mobile app to connect to the panel. Is anyone able to help?

Hi, I'm having a problem with one of my keyprox modules (address 1), when I went out earlier on I used it to full set via pin number, when I came home again it wouldn't respond to a fob to unset or accept a pin, subsequently the alarm triggered and had to be unset from a second keypad (address...