flooring

Hi all, I have just purchased a bungalow. It's in need of a full renovation but just doing the planning now. I am wanting to install word flooring (or LVT) throughout as I think it makes a place look bigger. I have seen some really lovely parquet LVT and engineered wood floors and wondering if...

A cottage we lived in for a while, and which we now let to a tenant, used to have an under-floor heating element above the original floorboards, on which was a layer of quarry tiles. The element was connected to an electronic controller, and has always worked well. Now the tenant has decided to...

Hi, I'm planning to utilise my basement space (previously a garage) however I'm in need of creating some additional ceiling height - especially where currently positioned there is an RSJ. In summary, I want to remove it, and replace with wood in a similar arrangement to the rest of the house...

Hi, We need to do kitchen flooring with new porcelin tiles. The kitchen currently have existing tiles which needs to be removed. My question is, with kitchen in use (BAU) how do we go about this project? All the other storage cabinates can be removed (and things can be stored in temp. storage...

Hi All. We are looking at re-doing the flooring over the next couple of weeks. Current We currently have a beige carpet which between crazy nephews and nieces that can't sit still with food and a cat that loves to pick at the carpet now needs to be changed after 4 years. What Hallway and Open...

I am laying some engineered oak flooring, and am deciding on which direction to lay the boards. It for my master bedroom, which has a small walk-in wardrobe which I will continue the flooring into. The room is east facing. Here are a couple of photos. This photo is the view from the door...

Hi I fell out with the guy who was meant to fit my karndean floor in my kitchen. He said my floor couldn't be made flatter, and it had 8cm undulations. I levelled it with fibre self levelling compound from mapei, and now it's much better. I have karndean opus planks. They reccomend using...

I am putting down new floors in a downstairs WC (tile) and adjoining hallway (12mm laminate). I was looking at transitions between the two and was really hoping to achieve a really minimalist finish like the attached pic Is this possible with laminate flooring that is essentially 'floating'...

Is it the tiles or the bitumen used to stick the tiles down that is the DPM? We have Marley tiles in our 1957 bungalow. Some of the tiles are broken & some are loose especially near the skirting board where carpet gripper has been removed. We can see bitumen underneath the tiles. We want to fit...

Over time I've noticed this lump forming in just one area of our floor... First I thought it would be a leaking pipe but there's no piping under that part and our boiler hasnt experienced any pressure drops. I believe this concrete floor was laid down like 30 years ago. Any idea what it could...

I treated the conc. base with sikka rapid dpm, then put membrane or damp course under the stud soles. I'll cover the whole base with a taped seam membrane anyway. I was thinking of masonry screwing a couple of treated 38x63 CLS down flat directly on the membrane at the base of the stud wall to...

Hello, I’m planing and laying click flooring on our ground floor. I intend to screed to get a good level using NA. Most of the ground floor are marley tiles. I’m planning on either screeding over the tiles or remove, depending on how easy they come up. ( I’m aware of the asbestos issues and...

Hi, I'm installing some OSB board for flooring in my upstairs bedroom. I'm not sure which side should face the joists and which side it is that you walk on. I can't see any stamps or markings to indicate the correct orientation. I need to know this before I commence with the project, hence...

I had a guy booked to do Karndean LVT flooring in my bathroom and kitchen (50 5 star reviews on google), he came to do the quote I asked 'is the floor ok, is it flat enough'. He said yeah its fine, 6mm ply will cover up all the unevenness. I even said 'is 6mm ply enough, seems very thin' and he...

Hi all, I have laid some laminate flooring in the kitchen (the floating, interlocking kind) on insulation and a dpm - all bought from B&Q. In the last couple of weeks, some of the joins have been bubbling and it looks like it's getting worse. My first thought was water getting under the floor...

I am having a plated underfloor heating system installed between the joists of my suspended timber floor throughout the house, so, I was wondering what the best subfloor type is to lay over the joists when the UFH has been installed. So the floor joists are at roughly 450mm centres which is...

Hi, Just removed my old T&G plank and at the beginning I though that below I had a very strong Concrete flooring but this is not the case. I made few trial hole and the drill bits goes in like a soft cream and what come out is a black soil. the all flooring does not sound very strong and my...

Hi, I'm on the bit of renovation and found out after removing the carpet that my slab is in concrete with wood planks on top. I have removed some plank and some black paint seems to be on the slab. My question is because the living room has an extension and the level is 15mm different some...

Hello, We have just had a quote from a local independent flooring firm and it feels very expensive to me, but I would be interested to hear if I am being unreasonable or not. Hallway of 2.5m x 2.0m with Project Floors distressed smoked oak going onto existing tiles. Was told there needs to be...

I had to remove portions of the existing subfloor chipboard panels (18mm depth), which now I need to replace (I already bought a new P5 panel). The problem is that one edge of the hole is irregular, and I'm worried that parts of the new chipboard won't have sufficient resting contact with the...