help

I have just brought a hive and need help with how to wire it up to my existing system can someone please tell me where to transfer the wires in the image attached : N L L A B Many Thanks

Hi there, My wife decided that the space under the stairs wasn’t being utilised properly so asked me to open up the space to see what could be done with it. I’m wondering if anyone could give me some advice on if this is is structural/supporting brick wall or not? Cheers, Jeff

Hello everyone, My builders have installed these roof battens, however as you can see they are not horizontal and the lower battens are clearly sloping down. Is there an explanation behind this? The builders have said this is fine but I’m not sure how the tiles will be laid, and will the tiles...

Hi guys, I’ve been trying to replace my landing light all night last night and I just wanted to see if I’ve wired it up correctly before I connect it up. I followed this diagram that I found. And I have a blue wire and yellow wire left, I’m assuming the yellow wire is the switch wire, I’ve...

Hi all, I've recently bought a house in the Cotswolds and am looking to paint the door sage green. The house was built in the 80s and therefore doesn't have the old yellowy Cotswold stone - it's a newer, probably reconstituted, more creamy colour. All the info I can find online for paint colours...

Hello, I need help with my current project I hope more experienced people can help if what I have planned is okay, what should I maybe do different. I live in Europe so building materials might be different. What is important that I have a big balcony which has to elevated around 2 inches. It...

These are the same concrete pavers but from different packs. Will they all go the same colour with sun bleaching? They are the same colour when dry but different shades when wet.

Morning all. Hopefully a quick resolution incoming… I’m fitting a dimmer in the bedroom! Stupidly I forgot to take a picture of the previous switch before removal, however, there were two brown wires wrapped together and a single live wire. I copied what was the wiring from the previous...

Hi, new to forum and seeking some advice/ guidance. I have a concrete floor and have removed skirting. However it appears the concrete floor was poured after the skirting so I have now have a small gap around the perimeter of the room. Deeper than 5mm (so am thinking self levelling compound...

Appreciate any help on figuring out what these are to build up a garage wall and porch wall

Hey! I live in the middle floor of a 3 storey apartment building. The flat above has a leak. I’ve been in to investigate, and from what I can see the seal from the nut and bolt screw holding the cistern to the toilet has warped. Could anyone recommend what type of fixtures I’d be searching...

Hi we moved into our house last summer and it wasn’t until winter we started having problems. We couldn’t get the radiators to work until my dad came around and fiddled with loads of stuff on the boiler and the radiators. To his credit it worked but now we can’t get the radiators to go off and...

I'm replacing my multi-zone Danfoss controllers with Hive, so far the downstairs Hive receiver is wired in and working well. I'm having a problem wiring in the Hive Single Channel receiver to replace a Danfoss TP 4000 for the upstairs zone. The TP 4000 is battery powered and has 2 connected...

Hello, I'm considering purchasing this property but I'm worried about cracks around the windows both internally and externally. The windows sit one on top of the other and the external crack in the picture below sits between the two of them. We're first time buyers in our 30s and have already...

I’ve just purchased a house and have stripped the wallpaper to find this grainy material. From a quick google search it seems to be lime plaster?? Do you agree? If so how easy is it to remove so I can re-plaster? Thanks

I’ve just bought the Hive Mini and I’m trying to switch the receivers My current one is a Honeywell wired up as seen here…. Can some please tell me where exactly each wire goes in the hive receiver as that is marked N L 1234 not NLL ABC Thank you

Hi Everyone. I was given a non worker Stihl Edge trimmer and due of this cold weather, I decided to take it apart during the weekend. Compression test was 75psi. I then decide to remove the cylinder to see inside the condition and found a nice score starting from the bottom to the below of...

Renovating our Victorian London terrace. The front garden was built up way too high so we have dig down to below the air brick and plan to lay permeable membrane and then cover with gravel. We have come across what looks like an old drain in front of the air brick (photo attached) but we can’t...

I was half way through hardwiring dash cam yesterday when it started to rain and was getting dark so decided to stop where i was, close everything up and come back to it tomorrow. last night drove the car to the shop and back with no issues. came back to the car today and the battery was dead...

I’ve removed some wallpaper from the bedroom in our 1930s house and the plaster has come away in a couple of areas. 1. Under the window - exposing the timber of the bay window wall 2. Partition wall with another room - guess this is brick with plaster and the skim coat has come off. Based on...