help

I need to find a length of this window bead. Ive been to my local window place who says its obsolete. ITs external beading and has like a concave dip in it as per picture. Can anyone tell me the name of it or where i can purchase a length please. Im pulling my hair out here.. lol thanks again

So I took my dishwasher out yesterday as I was going to change the drain hose but then realised I had the wrong one. So I put everything back but now when running it's saying check water. I've taken the chamber off and made sure its all clear I can see the water filling up but the dishwasher...

I have a T8 ballast to replace in my strip light. I took it down hoping to replace it with exactly the same part. However I don’t seem to be able to locate the particular one that’s in there. I’m not sure which spec I have to be careful to match to ensure it’s the best alternative and make...

After few season on not be able to use the conservatory as too cold on winter and too warm on summer. I`m now exploring the idea of converting the roof into a solid one but not sure what can be done without stripping everything down. This is a Victorian conservatory 3x3mm around 20 years old...

Apologize if this is not related to car repair but still about mechanical equipment and maybe someone could help me. I have picked up from a friend an old Sthil petrol cutter which had all the nuts holding the recoil pull start completely locked. Look like they attempted to unscrew and with...

Hello everyone, I am looking at building a timber lean to veranda / patio cover down the side of my house and was hoping that I could get a bit of advice on how to do it. The span is going to be roughly 2.7m wide by 6m long with a roof at 15 degrees. The whole thing will be painted with...

Hi, We've had our chimney breast opening widened (probably a brick wider than the builders opening) and the lintel replaced with a stronger one and moved higher up at the front. Some of the brickwork needed to be cut out. Is our chimney flue and the second/third row of bricks supported by the...

Less than a year now. Got new plumbing system with Atag I40s system boiler with unvented cylinder 210l. Compared to the previous old vented system the gas bill seems to have double out. Plumber set up hotwater to 65° and heating to 70° Can you please advise if the hotwater can be keep lower...

Hi This is my first time posting. I'm trying to find out the problem with my Hotpoint fridge freezer. Before Xmas, the power tripped. As time has gone on, we've determined that it's the fridge freezer. It's become more frequent now. When the door is opened (and not every time) the power trips...

Recently moved into a flat and the owner had warned me that the wood floor wasn't too great so he put carpet over it. I've since removed the carpet as my spouse is adamant on having me restore the wood but I don't know how to make this look good. I've tried using a belt sander and it makes it...

Sorry for the silly drawing but this simple question has been annoying me all night as I try to understand permitted development rights. If I would like to build a rear extension on my semi detached house to the projection of 6 metres back that is clearly allowed under permitted development. But...

I'm trying to install curtains (for the first time) and am having problems drilling into the wall. I'm drilling about 9cm above and 4cm to the side of a recessed window. I'm hitting this round metal object about 3cm into the wall. I can't drill further properly because the drill bit slips away...

Hello, We've planing permision for a loft conversion and extension. It's complicated by the fact we are not clear that we want the extension part (or at least all of ir) (lose to much outside space) and that we are not happy with the proposed floor plan. (the plans came with the house, we...

Hi all, First time posting here so please excuse incompetence. We bought a DEWALT DCD776 to help with our home renovation. It's been through some light to medium work so far and has generally been really good to use. Recently, we have found that inserting screws (any type) has been challenging...

Hi everyone, New to this forum and in desperate need of advice. I had a builder do some damp proofing work for me in my house. I live alone and was starting to panic a wee bit about the damp (it’s an old house) and this builder seemed to really know his stuff. He quoted me 10k for damp proofing...

We have a room with a stone archway and I want to create a partition in the archway with a door to create a separate room. We are using this as a cinema room so need to add some soundproofing. I have thought of a couple of solutions, 1. Hang some sliding doors - these would be big with not a...

The bottom of my radiator has eroded and water keeps coming out and it’s leaking into downstairs, it’s the copper pipe that connects the radiator and goes under the floor boards. Is there any way I can stop the water coming out of it just for tonight until a plumber can come out in the morning

As per attached photos. I have an old staircase which need a bit of modernization. I have seen someone cladding it with solid timber flooring but not sure how works around the bullnose area. How would you do it. Any help and tips is welcomed Tnanks

Hey everyone, Long story short, I got two big patches of plasterboard ripped out either side of the chimney breqst builders opening. I plan to use Thistle base coat (hardwall) into the large patches. After that I plan to apply multifinish coat. Is that okay? Should I also cover the small...

Hello DIYnotters! Got a few questions regarding damp but some useful info beforehand: Property is end terraced, built around 1990, in Swansea, no subsidence/coal mining nearby and lastly - the house has ventilation grills that cover holes drilled through to the exterior of the building in...