hive

Hello Forum ! Hoping to pick your brain about something i have in mind to maybe make my central heating a bit more efficient. The current set up i have is a brand new vokera combi boiler with a hive thermostat and traditional TRV's on every radiator. The house it is not big and we have an open...

Hi All, Having some trouble getting my new Hive thermostat to control my boiler. I have an Ideal Logic 30 and have install a 5 core into the Hive receiver and ran the L,N&E into the boiler supply. I've then ran cables from the common (1) & Heating on (3) into the thermostat connection in the...

Hi. About 10 years ago I had British gas install their Remote Heating Control hub, receiver and wireless thermostat. All worked very nicely and later they brought out the Hive app so I could use it on the phone. Now they brought out a new Hive and my old system has been discontinued and no...

Hi, I've just purchased a Hive Thermostat today. I originally had a Honeywell Home T3. The boiler is a Baxi Assure Combi 25. The issue I'm facing is the wiring (seems as though this is a common theme. Anyways I've attached a picture of the wires that were in the wall. There is a brown one, a...

Does anyone know how to / if its possible to fit a Hive receiver to a Potterton Suprima 40L boiler? Here are some pics of the current system: It has a 3 way valve and pump. Thanks.

Hi, I would like to replace my Danfoss (not sure if TP4000 or TP5000) with a smart thermostat and I was thinking of going with Hive (mini single channel) as I need a battery powered one. There are just 2 wires of my Danfoss, one that connect to com and one to on. (None of them is a permanent...

Any help on this matter would be greatly appreciated. Back story: I purchased a house with a 2020 Baxi 600 heat only boiler and it had the original 1980 danfos102 receiver/ timer and no thermostat, so thought I’d fit a hive system as they seemed good. The issue: The central heating comes on...

Hi, I am trying to replace an analog timer with a Hive, but the timer only has 3 wires. every other discussion I have read mentions 4 wires! 1 (timer) to N (hive) 3 to L 4 to ??? Please help! Thanks

I'm replacing my multi-zone Danfoss controllers with Hive, so far the downstairs Hive receiver is wired in and working well. I'm having a problem wiring in the Hive Single Channel receiver to replace a Danfoss TP 4000 for the upstairs zone. The TP 4000 is battery powered and has 2 connected...

Hi All, I have been in my home for around a year now, and when we originally moved in there was a worchester bosch greenstar Ri boiler. In my bedroom cupboard the boiler is positioned, along with a large hot water tank below it and then above in the loft an expansion and cold water tank...

Hive TRV leaks when unscrewing Hi this is the issue, I can't take the M30 attachment off without water leaking, when I try to unscrew it the black valve inside also turns and water starts leaking out. I managed to get the adapter off using a dremel to carefully cut it off, and this is...

I’ve just bought the Hive Mini and I’m trying to switch the receivers My current one is a Honeywell wired up as seen here…. Can some please tell me where exactly each wire goes in the hive receiver as that is marked N L 1234 not NLL ABC Thank you

Hi Everyone, I'm new here and dealing with a very bespoke system so please be gentle. Basically there are two zones in the house. Upstairs (with hot water) and downstairs. Originally the zones were controlled by two Horstmann H17 XL with separate thermostats in each zone. So far I have...

Hi I've got a Main Combi 30 Eco which currently has a termistat salus rt501RF with a Salus RXBC605 Plug-in Receiver fitted to its fascia , Im now looking at fitting a Hive active heating v3 system to it ( heating only model ) I have followed previous forums by disconnecting the yellow link...

The boiler is a WB GreenStar 38CDi Classic. We bought the Hive Thermostat Receiver and Hub for Combi boiler. The Honeywell had cabling to its Earth, Live, Neutral 3 and 4 terminals (terminals 1 and 2 not connect/wired). The Hive Receiver was wired the same. All paired and Hub set up...

Good afternoon, I was hoping someone could help me/give me advice here regarding improving our heating system at home: We've moved into a house that we bought earlier this year and the boiler and heating controls were outdated so we upgraded the boiler to a Worcester Bosch Greenstar 8000 Life...

Hi All I was hoping you might be able to help me with a situation. I have recently installed the Hive system which is the dual channel (hw&ch). Our system is a gravity feed Y-Plan system (so I believe). The issue we are currently having is when the central heating is turned on, the light on...

Hi All, Apologies if this has already been answered earlier, but I cannot find a 100% confident answer. I am replacing my old Honewell BDR91 with the new Hive Mini (dual channel) Thermostat. I have Baxi 400 combi boiler at home. Attached image with my old Honewell BDR91 wiring, I have...

Hi, I had the original hive and the hub packed in. So when I saw the new one on a black Friday deal jumped at it for £110. I replace everything but now hive cannot control the boiler. I have changed any wiring. But I have noticed the new receiver has a hot water button. I attach the pic of...

Hey, Looking to switch over from hive to drayton wiser. Based on wiring diagrams it looks like the terminals line up 1-1 but would like someone to confirm. Unsure if i need to bridge live to common (terminal 1) given that there's already a connection to COM.