New Boiler installation

[BigRedBus]

Hello you steel here

 

[BigRedBus]

I won't install or be crazy to install something that can be dangerous and harm my family

 

[Steelmasons]

Hot water rated @ 2.3 m3/h for a vogue 32c???...
No Low rate combustion analysis recorded on benchmark???shall I go on???

 

[BigRedBus]

Hot water rated @ 2.3 m3/h for a vogue 32c???...
No Low rate combustion analysis recorded on benchmark???shall I go on???

Ok whatever that means

 

[Steelmasons]

[GALLERY=media, 99439]IMG_4489 by BigRedBus posted 15 Mar 2017 at 7:53 PM[/GALLERY][GALLERY=media, 99440]IMG_4491 by BigRedBus posted 15 Mar 2017 at 7:53 PM[/GALLERY]
[GALLERY=media, 99441]IMG_4492 by BigRedBus posted 15 Mar 2017 at 7:53 PM[/GALLERY]
Happy

...that "installer" owes me a fookin keyboard looking @ that benchmark..

 

[Stadan20]

Benchmark dated 2013 ?

 

[BigRedBus]

Benchmark dated 2013 ?

Thanks ... appreciate for noticing that.

 

[Stadan20]

Thanks ... appreciate for noticing that.

Again I skim read but assumed U just had this installed ?

 

[BigRedBus]

[GALLERY=media, 99445]IMG_4493 by BigRedBus posted 15 Mar 2017 at 8:13 PM[/GALLERY]

Not sure what to say about the 2.3
To the plumber

 

[Dan Robinson]

Ok whatever that means

It means he didn't have it on full rate. Could be undersized gas pipe or slow cold main, but the numbers don't add up.

 

[BigRedBus]

Again I skim read but assumed U just had this installed ?

This boiler was on released from the manufacturer this month.

 

[Stadan20]

This boiler was on released from the manufacturer this month.

Hmmmm

 

[BigRedBus]

It means he didn't have it on full rate. Could be undersized gas pipe or slow cold main, but the numbers don't add up.

Guys im getting worried now...
Can I press some buttons on the boilar? And find the right figures
I live on a send floor flat, water pressure not good and flow rate not good either, thats why i wanted a 22mm dedicated mains water for the boiler. Not sure about the gas pressure

 

[Dan Robinson]

Hmmmm

Vague Gen 2 mate.... Shambo hasn't even seen one yet apparently

 

[Dan Robinson]

I don't have the manuals for it yet. Maybe @shambolic could email me copies? But the tests the guy carries out for the benchmark book need an analyser and measuring water flow rates.