texecom

I have a texecom premier 48 (older panel) I installed a while back but cannot get it to finish arming and never have managed it... It just keeps buzzing and claiming it will arm but never does, until cancelled with the user password. I can't see anything obvious in my settings that would cause...

Hi all, ... First post, just want to start with some appreciation for all the information already on this forum. I have used it to setup my Premier Elite system from scratch with no alarm experience. just being a qualified electrician. I do however have 2 questions: - I have a Ricochet PA...

Hi all I recently installed a texecom alarm system to my property with a smartcom box all seems to be working correctly apart from a constant green flashing light on main panel, I did reset the panel from box but everything works as it should,any ideas to why this green light is flashing would...

Hi there wonder if anyone can help. Recently had installed a Pyronix Enforcer kit with a Deltabell X Grade 3 which was working fine. The enforcer became faulty after 9 months so I replaced it with a Texecom 64W being the hard wired keypad still keeping the Deltabell X. The alarm was fitted by a...

Hello all, Thanks for reading this post. I had a new alarm fitted to my house last week. I currently have an expensive ornament and before I seek another professional to get it sorted I am wondering if I can get it sorted myself. I am a fairly technical person and class myself as a fairly...

Hi folks, this is my first post so please be gentle with me. I have tried to install a Texecom Premier Elite 64-M (Wireless) including a Texecom Connect SmartCom and Texecom SmartKey. I've managed to get the system working to some extent but i'm having problems setting up the SmartKey. All...

Hi folks Had a nightmare 24hrs with wintex corrupting settings on elite 24 panel via smartcom, gave a com1 error. Quite possibly user error, as after setting up the smartcom, I did not pull a fresh config from the panel, instead was editing a previous version prior to installing the smartcom so...

We've just moved into a house that has a professionally installed Texecom Premier 24. Other than a recent battery fault (which seems like I should be able to sort out) it works well with PIRs in 4 rooms several door entry sensors and 2 fire alarms. I'm quite taken with the idea of the Texecom...

Hi Guys Im hoping someone can assist. I have today added the smartcom connect to my prem elite 64 system. Its all set up, connecting, app is set up and seems to be functioning as normal, alerts coming through as expected etc. My one issue is I cant arm or part arm from the app. Im now losing...

Hi, With a bit of help from the forum, I have my Elite 24 up and running :-). My job for today was to add the Smartcomm module and 32XP-W. The former has gone ok, but I'm stuck at the latter. The panel recognises the expansion module, however, when it searches for the wireless PIR (sitting...

Hi, With a little help. I've almost completed my DIY swap over of a gardtec to a premier elite 24. I have two head scratchers left. Here is the first one... All of the devices are finally shown as secure :-). With the exception of the door contacts, which are "entry/exit", all are set to...

Hello, Is there an option or zone type to monitor a door using magnetic contact as follows: no PIN codes to be used. no arming or disarming to be done. and whenever the door is open the internal sounder keeps chiming or quacking, and once the door is closed the sound is stopped...

Hi. I know that there seasoned installers are probably flicking their eyes to the ceiling at a novis posting questions about such things. I have installed a Texecom premier elite 24 control panel with a wired 8 zone expander + a ricochet 8 zone expander. The other PIR's go to the elite 24...

Hello all, I currently have a wired alarm system that I want to replace with a hybrid system. The current system is not user friendly and there are no window contacts. My main aim is to have a secure system which I can control via an app. I received the following quote from an engineer for a...

hello All, hoping for some help, trying to connect to a elite 48, software versions 4.01, trying to connect to wintex 3.5.6 but get the error connection to the panel could not be established, the LED on the usb lead is flashing red when trying to connect

Hi, Sorry for the long description but I am attempting to install my alarm system but have been scuppered at the step I thought would be one of the easiest! I cannot learn my wireless sensors to the system. I have a premier elite 48 with version 4.01 firmware. I have a 32XP-W expander with...

Hello, Stupid question time, the battery in one of my Texecom Ricochet Micro Door Contact (GHA-0001) has died and I can’t for the life of me get the cover off to change it. I’m reluctant to manhandle it for fear of breaking the device. Has anyone had any experience with this, is there a knack...

I'm reasonably competent with all things electrical / electronic and recently moved in to a new house. I was initially planning to go for a full wired system as the house supposedly had a "first fix for Alarm", long story short the first fix was rubbish and had no where near enough cables for...

Hello My Texecom wireless alarm system has been up and running for 12 months with no issues then over the weekend an alert popped up concerning one of the outside bells. It is telling me there is a 'radio conf fail' and it isn't possible to set the alarm because it comes up with message...

I have one of the above panels that has been running for about 3 years. I came home the other day to see an error on the RKP 'Mains power off'. Checked and everything was okay, so cleared the error. It was only a few hours before it popped up the error again. Tested the mains, all okay...