texecom

Hi All, Starting a new thread after reading people experiencing similar issues to those described here: https://www.diynot.com/diy/threads/texecom-connect-smartcom-problem.523131/page-2#post-4629270 After some building works which included powering off the texecom for a couple of months and...

Premier Elite 88 Premier Elite AMQD Having an intermittent problem with arming. It seems to be linked to the zone that looks towards the keypad and one of the entrance doors. The zone in question is set to Guard/Access. Any ideas why this setup could be causing the arming problems? Thanks

I have a simple 16ohm speaker wired in to the aux+ and speaker- terminals, it works for warning sounds etc. But won't sound in the event of an alarm trigger. Checked the volume is up in the settings which it is, what am I doing wrong or if there another issue?

Hi sorry this is probably a noob question, I have the premier elite 64 with the smartcom setup. Smartcom connects to 2 serial ports and shows up in the communication options panel on com port 1 and com port 2. neither has an IP address, comport 1 (smartcom) is dhcp wifi I believe, I was just...

Hi, hoping someone can help me, I had to move my wintex and ricochet to a new machine. I have wintex running and connecting to my premier elite 64 no problem, but, if when connected through wintex i hit the ricochet button it just wont connect the bottom left "status" flashes a load of stuff...

Hi all. I have a self installed Texecom Premier Elite 64 W system complete with Smartcom remote control module hard wired to my network. I recently wanted it to auto disarm in the mornings just before we get up due to forgetfulness and noisy accidents! As part of this change I also split the...

Hello, Texecom Premier Elite 88 Texecom Premier Elite LCDLP Can someone please point me in the direction of how to configure some zones to chime but only within a specified time frame? I would like to have some door contacts chime only between 6pm and 6am, outside of that time there should be...

Just wondering if anyone else has experienced same issue. I fitted a premier elite wireless system just over 3 years ago. After about a year I had a battery fault on the internal sounder. Took the 8 lithium batteries out and tested them 7 were at 1.7v or above, one was 0.1v. Now after...

I have a Texecom Premier Elite 64W system and use a number their microshock wireless detectors on my windows. Over the last week, two of the detectors have given us what appear to be false alarms overnight after the system has been set overnight. The issue seems to occur after a long time of...

Hi all I have recently purchased the texecom premier elite kit 002 for my house. It has the 64W v5 control panel. I have watched a couple of youtube videos how to get the sensors registered onto the system bu my panel is not behaving the way the video shows. I have the commissioning jumper...

Just bought a Texecom Premiere Elite 24 kit - Panel, 5 x PIR, Bell/Sounder, Extension speaker, battery, Premier LCD-P Prox Keypad, Premier COM2400 Communicator and 5 x prox fobs. There is zero by way of instructions/manuals. Texecon site looks like you have to be a registered installer to...

Hello alarm gurus, I have never installed an alarm system before but I am looking forward to giving it a shot. I have put quite a lot of thought into how we would like the system to work and I believe I have chosen a system that is capable of meeting these requirements but I would like to get...

I have a Texecom 64-W panel (inbuilt wireless expander) that i've factory reset. The NVM erase counts down, and I go through the initial setup (language, default wireless, learn ricochet). When attempting to learn a device the panel simply makes one beep and does not initiate a 20 second...

Hi, My first post here. I tried seaching the forum but couldn't get a match on my issue. I'm installing a Premier Elite 24 with smartcom LAN/wifi. I have setup the smartcom by following these instructions: https://www.youtube.com/watch?time_continue=132&v=jLhAYV1kSTI&feature=emb_logo I would...

Hi All, I m having a right nightmare with Wintex and setting my night timer. Its simple what i need however whenever i set the times all it does is say Time Arming A......... lots of bleeps over the 10 minute test and then it just unarms and the log shows the set and unset but when i am...

Hi I have set up and have working a Smart Key on my Prem Elite 24, how do I activate the Panic feature (the press and hold disarm and power keys for 4 seconds)? Thanks

Hi I installed 6pirs on my new panel. Bell and keypad is working fine but the alarm won’t arm as it keeps displaying zone 1-8 tamper faults even tho I have linked out the zones completely and linked out the factory aux/fault connection. How do I sort this out. I used four wires and linked out...

I’m in the market for a monitored home alarm system, to be installed professionally. No DYI – so I hope this question is not off-topic, but I’m asking here in the hope people will be familiar with all aspects of how alarms work, not just DYI. Most installers in my area install either Texecom...

Hi All new to this forum so be gentle! I have a texecom elite64 and connect to it with the app. it pretty much works as planned but when arming/disarming with fob , although I do get a push notification, it doesn't tell me which fob was responsible. the keypad shows the appropriate name when...

Hi there, I have successfully installed a Texecom Elite 64W Ricochet with SmartCom and it is working very well with notifications sent correctly to my iPhone. What is odd is I must have missed a setting on the panel - as the notifications are always missing a word - it says things like...